How to clean a Washing Machine

If you’re a person who has newly acquired a washing machine, here are certain steps to make your journey a smooth ride.

1.Connect the machine to the power socket.
2.Connect the inlet pipe and outlet pipe. The outlet pipe should be placed appropriately so as to dispose off the waste water.
3.Add the detergent powder.
4.Power on the machine.
5.Make sure you have selected the required mode: washing mode, rinsing mode, spinning or dryer.
6.Set the water level.
7.And start!

Using a semi automatic machine is the simplest thing ever. A person has to be present to do a few tasks as the semi automatic machine requires manual human intervention. Here are the steps:

1.Add clothes to the tub.
2.Add water and detergent to the washer – just follow the directions on the label.
3.Select the length of the wash.
4.Once the wash is finished, drain the water. Add more water for the rinse cycle.
5.Drain the water.
6.Either transfer the clothes to the spinner tub (twin-tub models), or select the spinner mode (single tub models)
7.Remove the clothes and hang them on the line to dry.

Samsung offers a range of energy efficient washing machines for the worldwide market. As per Samsung, the front load washing machines offer excellent durability, ease of use and innovative technology. Here’s how to operate a washing machine by Samsung in quick easy steps:

1.Sort the laundry by colour/fabric type. Make sure to empty the pockets and pull the zippers up. Add the laundry in the machine. Do not overfill.
2.Close the door, press the power button
3.Open the detergent compartment and add the detergent as instructed on the package. Add bleach or fabric softener if need be.
4.Turn the cycle selector knob to the correct setting as required by your laundry load. You can manually tap the buttons and change settings if required on the control panel. These buttons control the temperature, rinse, spin and length of each cycle.
5.Press start to start the wash. A light turns on to show that the machine is in use. Once the cycle is complete, you hear a buzzer sound and the light turns off to let you know that the clothes are done with the washing!

Here are a few easy steps to take you through a whirlwind of laundry cleaning in your whirlpool washing machine:

1.To insert your laundry, lift the lid of your Whirlpool washing machine, if you have a top loading machine. For a front load, open the door to insert the laundry.
2.Add the detergent to the machine. If you are using liquid fabric softener or bleach, you can add that as well. A few Whirlpool washing machines have marked dispenser areas to pour the liquids. For devices with no markings, simply add the detergent and other items directly in with the laundry. It’s safe to remember that undiluted bleach can damage fabric it touches directly.
3.Close the door or lid of the washing machine. Turn your “Load Size” or “Water Level” knob to the setting that matches the size of your load.
4.Make use of the “Temperature” knob to select the water temperature in the washing machine.
5.Push in and turn the cycle knob till it points to your preferred wash cycle, for example “Delicates” or “Permanent Press.”
6.Pull out the cycle knob to start the cycle once you have selected your preferred wash cycle. If you need to stop it at any time during the cycle you can just push the knob back in.

The LG washing machines are easy to use. Separate the clothes based on their colours or fabrics, whichever you prefer. For washing new clothes, there’s a separate line of instruction in the user manual. Make sure you follow them correctly.

1.Now open the detergent dispenser drawer and add detergent + fabric softener
2.Once that’s done, press the cycle button and modify the wash cycle based on your needs to avoid any damage or colour bleed.
3.Specific facilities such as the Turbowash (quick soak), LGSteam (removes dirt, odour and wrinkles) and the Allergiene cycle (removes household allergens) are available to optimize your wash
4.Click start to start!

Operating the IFB:

1.Place garments loosely inside the drum after opening the porthole door. It’s always better to load garments one by one, a mix preferably of large and small clothes.
2.Turn heavy items like a pair of jeans or knitted garments inside out, remove loose hooks, rings and pins found on curtains etc. Or Tie a knot around them with the garments itself.
3.Close the door. you’ll hear a click. Ensure that no cloth is jammed between door and rubber gasket of frame.
4.For large garments like bed covers and curtains etc. open out the garments and hold from the centre to load.
5.Ensure that volume of load allows the clothes to tumble freely in the drum for best wash results.
6.Do not overload the drum. Doing so will affect wash quality. It might possibly damage the machine and clothes in the long run.
7.Running the machine underloaded may cause excessive vibration, noise and damage.

The best results will be achieved using the correct amount of washing machine detergent.

1.Approximate quantities to be used: Full load i.e. 5 kgs Detergents to be used as per direction indicated by the manufacturer on their package. Half Load i.e. 2.5 kg and below Use 20 to 25% less detergent
2.Preferably use a liquid detergent rather than powder.
3.If your locality runs on hard water or if you have more than usual stained clothes, add more detergent.
4.Using insufficient amount of detergent will lead to improper wash and grey-brown stained clothes.
5.Excess use of detergent will result in
6.Higher environment pollution
7.Generation of too much foam
8.Scale builds up

PROGRAMME RUN

Note:

-During the programme run the knob turns automatically in the clockwise direction only.
-Washing, rinsing and spinning can be seen through the porthole window.
-At any moment the position of the knob with respect to its start position shows how far the programme has advanced.
-The starting point is just beyond the thick line on the knob

To use a fully automatic machine without tap water is not possible however if you don’t have a tap near your washing area, you might want to install a water tank and pump water to the machine. Once your washing machine water valve opens, the water will flow from the vessel into the machine causing a pressure drop. This drop operates the pressure switch, switching on the pump motor. If drinking water is scarce you may need to provide a different water supply for the washing machine, using water that is not good enough to drink.

Certain metal compounds such as magnesium and calcium, form limescale deposits inside your washing machine’s parts with every wash cycle. These compounds affect the heating elements and other accessories and machine parts, reducing the machine’s efficiency and longevity.

IFB essentials Descale aka tub clean acts instantly on stubborn compound deposits and drains them out with the wash water. It restores the machine parts affected by limescale to their original crystal condition and leaves your machine drum sparkling clean.

Descale reduces maintenance cost of the machine, saves power and detergent consumption. A combination of mild acids and corrosion inhibitors gently removes limescale without causing damage to other parts of the machine. It can also be used on your coffee maker, electric kettle, shower-heads or steam irons.

To use it:

-Make sure the washing machine is empty before you start.
-Pour the contents of the descale into the detergent compartment.
-Select the 60-degree program and start the appliance.
-Once the descale is used up, run the machine once more without any added items to remove the descale residues from the drum/tub.

Comfort or as they call it, fabric softener is used in washing to make the clothes soft and good as new. There are different techniques to use the fabric softener with different variants of the washing machine. Here goes:

1.Using Fabric Softener in Fully Automatic Washing Machines

In most automatic washing machines, fabric softener must be added to where you add detergent – the location of the fabric softener section may vary in different machines, so be sure to check your washing machine’s manual.
Most fabric softeners come in liquid form and come with a measuring cup or in a sachet.
Fill the cup according to the instructions on the label of the bottle: adjust the amount of fabric conditioner you use according to the size of the load.
Now pour the fabric softener from the cup into the relevant drawer, and the machine will add the softener into the wash during the rinse cycle.

2.Using Fabric Softener in Semi-Automatic Washing Machines/ how to use comfort fabric conditioner in washing machine

If you’re using a semi-automatic washing machine, then you just need to add the correct amount of fabric conditioner to the last rinse.

What to Avoid When Using Fabric Softener

Please follow the directions on the label whenever using fabric softener – this way, you can be sure that you will get the best results.
It’s very important to note here that the fabric softener should not come directly into contact with clothes, as it could stain and spot them.

A user manual comes with the Godrej washing machine that helps you with the daily washing. It shows you how to install the washing machine, the purpose of each button on the control panel, the operation of each button ( be it temperature, water level, soak, wash, rinse, spin, etc.), operation of the important buttons (DAC, start/pause, save, child lock, memory backup, etc.), the types of cycle (rinse, soak-wash-rinse, wash-rinse, rinse-spin and spin only), the process, program cycles (fuzzy, normal, gentle, saree, jeans, strong, wool and favourite), the type of clothing that is best for a specific program cycle, selecting water level and load size and operation for every program cycle.

Not just that, the manual is highly efficient and will tell you how to look after the washing machine for longevity and when to not intervene and call a service person.

Although washing machines and dishwashers are completely different items when it comes to electronics, their end goal remains the same. Cleaning. A wide variety of Indians do not use a dishwasher but they are available to buy at your convenience, online as well as offline. They come along with a user manual that helps one with relevant operating information.

The haier washing machine only requires connecting the water inlet to a tap, adding the clothes and running the machine.

1.Water will keep pouring until the clothes are submerged in the water.
2.Switch on the appliance and select a programme.
3.Add individual selections from the control panel and start the wash programme.
4.Once the machine is turned on, it takes 41 minutes to complete the default process.
5.At programme cycle end END is displayed.
6.The appliance switches off automatically.
7.Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
8.Turn off the water supply.
9.Unplug the power cord.
10.Open the door to prevent formation of moisture and odours. Let it open while not used.